1A Headphones
MDR-1A
1A Headphones
MDR-1A
1A Headphones
MDR-1A
1A Headphones
Wide frequency response for a full range of sound
Wide frequency response for a full range of sound
The wide-band frequency range – spanning 3Hz to 100kHz – is designed for today’s broad variety of music styles. The 3Hz low end of the frequency range offers more than enough latitude for even the deepest sub-bass notes. At the 100kHz high-end, you’ll be able to enjoy vocal melodies, subtle audio harmonics and tonality, giving your music more life and realism.
High sensitivity for a loud, clear performance
High sensitivity for a loud, clear performance
With a high sensitivity of 105dB/mW, these headphones are highly efficient in converting electricity into acoustic signals. This means you’ll hear a clearer sound across the entire audio spectrum (compared to less sensitive headphones) when listening to music through the same source and at the same volume level.  
Aluminium-coated LCP diaphragm for more precision
Aluminium-coated LCP diaphragm for more precision
An aluminium-coated, liquid crystal polymer diaphragm gives a more consistent and precise sound across the entire frequency range than a conventional LCP driver. Sound energy lost during transmission to the headphone housing is more uniform, to ensure a true and authentic performance. You’ll also enjoy a flatter frequency response, even when listening to the ultra high frequencies of High-Resolution Audio. 
Bass enhancing vents for punchy beats
Bass enhancing vents for punchy beats
Precisely sculpted vents maximise the airflow within the headphone, allowing the LCP diaphragm to breathe more easily and deliver an instant response to powerful low-end bass lines.
Enfolding closed-back design seals in sound
Enfolding closed-back design seals in sound
The closed-back, enfolding design wraps around the ear, helping to seal in music and keep distractions out. Acoustics are reflected back towards your ears, so you hear even the subtlest of sounds. You’ll also feel every beat, as the closed-back design helps to maximise the bass signatures in your music. 
Balanced audio cuts cross-talk
Balanced audio cuts cross-talk
With a balanced 4-wire connection and silver-copper dual cord, audio channel separation is improved for better sound. Unlike conventional headphones, which share a ground wire, the cord includes left, right and independent ground wires for both channels, so you hear less distortion and cross-talk. 
Pressure-relieving earpads for total comfort
Pressure-relieving earpads for total comfort
Soft leather earpads with pressure-relieving cushions have been designed to rise and shape around your ears, ensuring a comfortable fit. Smooth materials and seamless sewing provide a harmonious mix of comfort and durability for long hours of listening.
Swivel folding design makes travel easy
Swivel folding design makes travel easy
Take these headphones anywhere you go. A swivel folding design makes it easy to store them when not in use or while traveling. The earcups swivel flat for easy packing in a suitcase or slipping into a bag.  
Included balanced-connection headphone cable
Included balanced-connection headphone cable
4.4Φ balanced connection cable separates left and right sound signals, while minimising signal transmission loss and resulting sound deterioration. The result is smoother high frequencies and superior sound quality.
Enjoy music as the artist intended with High-Resolution Audio 
Enjoy music as the artist intended with High-Resolution Audio 
Take your digital music collection to another level with High-Resolution Audio. By converting analogue music to digital at a higher rate than CD (24-bit/192kHz, rather than 16-bit/44.1kHz), High-Resolution Audio allows you to get closer to the original studio recording and enjoy your music just as the artist intended.
Dynamic HD drivers deliver authentic sound
Dynamic HD drivers deliver authentic sound
Powerful 40mm HD driver units with large vents enable the headphones to deliver punchy, rhythmic bass on even the most demanding track. A light but rigid aluminium-coated liquid crystal polymer diaphragm responds quickly to reproduce vocals and mid-high range notes with intense clarity. Turn up the volume and hear clear, precise sound across the spectrum.
MDR-1A
1A Headphones
  • MDR1AB.CE7_awards_1
MDR-1A
1A Headphones
High-Resolution Audio compatible
Responsive Liquid Crystal Polymer driver for clarity
Smartphone-compatible with in-line remote mic
Beat Response Control reduces heavy bass distortion
Foldable ear cups for easy portability
Driver Unit
40 mm dynamic – Dome type
Frequency Response
3–100,000Hz
Cord Length
1.2 m
Warranty card, Operating instructions, Carrying pouch, Headphone cord (1.2 m), Headphone cord with inline remote and microphone (1.2 m)
Size & Weight
Weight225 g
General Features
Driver Unit40 mm dynamic – Dome typeCircum Aural TypeYesDynamic TypeYesMagnetNeodymiumImpedance (Ohm)48ΩFrequency Response3–100,000Hz
Sensitivities (dB/mW)105 dB/mWCord TypeDetachableCord Length1.2 mPlugGold-plated L-shaped stereo miniWearing StyleOver-Ear
Microphone
Direction of In-Line MicrophoneOmni directional
Design and Sound Features
LCP DiaphragmYes
Powered by Flixmedia
This content uses cookies to improve your experience. By continuing, you agree to this use. Learn More at https://www.flixmedia.com/privacy-notice