Close
Fast, even whole-room heating. Powerful personal cooling.
Long range, powerful airflow
Focused mode channels a powerful jet of air for long range, personal heating.
Fast, even whole-room heating
Diffused mode heats the room evenly, with no cold spots.
Our safest fan heater yet
Focused mode channels a powerful jet of air for long range, personal heating.
Precise room heating
An intelligent thermostat monitors the environment, projecting warm airflow to reach and maintain your chosen room temperature.
Acoustically tuned, and now 75% quieter
With streamlined air channels for reduced turbulence, our latest fan heater is 75% quieter than the previous generation. So it can heat your room or cool you, without disturbing your sleep.
Air Multiplier™ technology
Air is drawn in by the impeller and passes over a 5° airfoil-shaped ramp – with Bernouli principle creating an area of low pressure. This induces air behind the fan, while surrounding air follows in a process known as entrainment – multiplying the initial airflow by as much as 15 times.
Jet Focus control
In focused mode, warm air is powerfully accelerated from the rear aperture, where it's channelled into a long-range jet of heat. Building on the principles of fluidics, first discovered in 1960s, this powerful jet is deflected by a second jet, striking it at precisely the right angle. This guides the airflow over a wider angle, evenly heating a whole room.
Positive temperature coefficient ceramic plates
Using a similar technology to cooling channels on jet engines, ceramic plates within the loop amplifier heat the airflow, while siphoning off a small amount of cool air. This cool air is circulated between the plates and the thermoplastic, creating a buffer to keep the surfaces of the fan heater cool to touch. The ceramic plates warm up to a self-regulating 180° – below the burning point of dust.
Key features
Air Multiplier™ technology
No blades, no choppy air. Air Multiplier™ technology amplifies surrounding air, giving uninterrupted stream of smooth airflow.
Precise room heating
Projects warm airflow to reach and maintain your chosen room temperature.
Quiet Mark accreditation
Awarded for improved sound quality. Quiet Mark is a registered trademark of the Noise Abatement Society.
Sleep timer
Can be programmed to turn off after preset intervals, ranging from 15 minutes to 9 hours.
Safe
No fast-spinning blades, no visible heating elements. Automatically shuts off when tipped over.
Easy to clean
With no awkward safety grill or blades. Simply wipe with a cloth.
In the box
Dyson Hot + Cool fan heater
Remote control
¹Versus previous generation
Specifications
Weight
2.68 KG
Format
Desk
Air treatment type
Hot+Cool
Temperature setting
0-37 Degrees
Base diameter with plate
204 mm
Airflow at max. setting
186 l/s
Height
595 mm
Length
113 mm
Width
153 mm
Powered by Flixmedia
This content uses cookies to improve your experience. By continuing, you agree to this use. Learn More at https://flixmedia.eu/privacy-policy/