Beat the heat and breathe cleaner air
Dyson purifiers are engineered to cool you with purified air to tackle indoor pollution, all year round.
Captures dust, allergens and bacteria5. Even destroys formaldehyde.1
Removes 99.95% of ultrafine particles2
Fully sealed to HEPA H13 standard – what goes inside, stays inside3
Purifies and heats the whole room4
Automatically senses, reacts and displays real-time air quality
Fully sealed to HEPA H13 standard – what goes inside, stays inside3
Purifies and heats the whole room4
Automatically senses, reacts and displays real-time air quality
We test beyond the industry standard.For real living spaces.
Dyson engineers designed the POLAR test to challenge the industry test standard – measuring filtration, sensing and circulation to ensure the whole room is purified properly.
Poor air quality isn't just a problem outside. It's a problem inside too.
From pets and flowers, to sprays and stoves, our homes can trap pollutants in the air. That's why Dyson purifiers automatically sense and remove them.
Senses and reports, automatically
Four sensors, including a solid-state formaldehyde sensor, interact with our unique algorithm to precisely diagnose, display and react to your air quality.
Captures and destroys with advanced HEPA filtration
The HEPA+Carbon filter captures gases and 99.95% of particles as small as 0.1 microns.2 Our catalytic filter continuously destroys formaldehyde1.
Destroys formaldehyde, continuously
The Dyson catalytic filter continuously traps and breaks down formaldehyde1 molecules into water and CO₂. And it never needs replacing.
The only purifier fully sealed to HEPA H13 standard
To prevent pollutants leaking back into the air, it's not just the filter that's sealed to HEPA H13 standard, it's the whole purifier3. So what goes inside, stays inside.
Fast, even room heating
Air MultiplierTM technology projects purified, heated air throughout the room.4 Once your target temperature is reached, heating automatically stops.
Smart purification, controlled by app or voice
Control and monitor air quality from anywhere with the MyDyson app,6 or hands-free with compatible voice services.7
In the box
Dyson Purifier Hot+Cool Formaldehyde
Remote control
360° Glass HEPA and Activated Carbon Filter
1 Third party full machine testing based on GB/T 18801-2018 formaldehyde cumulative clean mass testing with continuous injection until plateau of formaldehyde CADR is achieved. Results may vary in practice.
2 Tested for filtration efficiency at 0.1 microns (EN1822, ISO29463). Gas capture rates vary.
3 Particle challenge by DEHS oil specified in EN1822 within a chamber specified in ASTM F3150. Tested in Max Mode at IBR US, for whole machine efficiency above 99.95%.
4 In maximum setting. Tested for air projection, purification coverage in a 81m3 room and heating performance in a 35m3 room.
5 Whole machine tested by independent third-party laboratory Airmid (Ireland) in 28.5m3 test chamber pre-conditioned to 20±3C and RH 50±5%. Influenza A (H1N1) aerosolised in the test chamber and airborne concentration observed for the duration of 60 minutes under maximum Fan speed. Dyson Purifier achieved 99% efficacy but real life efficacy may differ depending on actual environment and Fan speed. Tested on Influenza A (H1N1) only.
6 Requires device to run app, Wi-Fi or mobile data, Bluetooth 4.0 support, and iOS version 10 or Android version 5 (or above). Standard data and messaging rates may apply. App control doesn’t apply to heating.
7 Refer to the MyDyson app for compatible voice services.
|
Weight
5.5 kg
|
Airflow at max. setting
290l/s
|
Oscillation/Angle
350 degrees
|
Cord length
1.8 m
|
|
Number of speed settings
10
|
Total height
764mm
|
Voltage
240 Voltage
|
HEPA filter
Glass fiber HEPA filter medium
|
|
Sound level
62 Decibel
|
Product diameter (skirt)
220mm
|
Product diamater (shrouds)
204mm
|
|
Height
76.4cm
|
|
Length
20cm
|
|
Width
24.8cm
|
This content uses cookies to improve your experience. By continuing, you agree to this use. Learn More at https://www.flixmedia.com/privacy-notice